1/48th Post War USAF/US Navy/Russian

Online Catalogue | Flightpath | 1/48th Post War USAF/US Navy/Russian

A.4 Skyhawk Access Ladder A super-detailed unit in cast metal and etched nickel silver for any of the 48th 'Scooter' kits, including finely etched step tread detail. Price: £4.20 (£5.04 Including VAT at 20%) Quantity:

Sea King Detail Set For the Hasegawa kit - this set includes some undercarriage & rotor fittings, parts to assist in modelling the tail section in the open position, windscreen wiper & mirrors, side cab window frames, crew entry steps, entry door details, and a beautifully detailed interior assembly for the entry area immediately aft of the cockpit - outstanding value! Price: £7.60 (£9.12 Including VAT at 20%) Quantity:

A.10 Thunderbolt II Detail & Weapons Set This set provides canopy framing and cockpit fittings, turbine blades, and many airframe fittings and updates, including formation lights. An access ladder is included, together with AGM-65 launch rails and missile details, an AN/ALQ-131 ECM Pod (both deep & shallow options), a DRA unit with two AIM-9L missiles and two CBU-87 cluster bombs. Also included is a fully detailed access door to the gun loading bay for use when displaying an A.10 with our mechanised Ammo Loader kit. [see below]. Although Primarily designed for use with the Monogram kit, much of this set is also fine for use with the Italeri kit. Price: £16.95 (£20.34 Including VAT at 20%) Quantity:

A.10 Mechanised Ammunition Loader, with Ammunition Cart An intricately detailed kit to construct these items essential for your A.10 displays. The ammunition belt detail is faithfully reproduced, captured together with the finely-etched checker plate bed of the ammo. cart with its five fully-detailed containers. This kit contains 140 x 280mm of etched sheetage together with many fine castings and is superb value for money. Price: £19.50 (£23.40 Including VAT at 20%) Quantity:

C.130 Hercules Detail Set For the Italeri kits - this large fret gives rear cargo hold and ramp details, cockpit entry steps, cockpit, airframe and undercarriage details, wheel chocks, and all wingflap detail. A truly comprehensive set of finely-etched components. Price: £26.00 (£31.20 Including VAT at 20%) Quantity:

F.111/EF.111a Access Ladder Set Contains 2 super-detailed ladders in cast metal and etched brass - ideal for your Vark & Raven displays. You can use these ladders one at a time with two models or on both sides of the same aircraft. Price: £6.75 (£8.10 Including VAT at 20%) Quantity:

F.111F Pave Tack Pod Set This set includes a beautifully detailed Pave Tack pod in injection resin with some etched detailing + parts for the cradle and a cutting template for the lower fuselage of the Academy kit. Also included is a shallow config. AN/ALQ-131 ECM Pod as carried by the F.111Fs. This set is ideal for use with our GBU-24/Paveway III Laser Guided Bomb Sets Price: £11.20 (£13.44 Including VAT at 20%) Quantity:

F/A.18 Hornet Access Ladder Two fully detailed castings with etched steps and latches make this very nice model of the pull-down ladder on the Hornet Price: £3.50 (£4.20 Including VAT at 20%) Quantity:

US Navy Carrier Deck Diorama Set This set provides 2 Tow-Bars, 4 Wheel Chock units, up to 11 Tie-Down Chain assemblies, and 36 Deck Tie-Down Points [each with two styles of grating], together with Carrier Deck Edging Panels. In addition - a painting template is included for applying the characteristic yellow & red broken lines to our Carrier Deck Sections [see below]. This super-value set is in cast metal and photo-etched nickel silver. Price: £12.75 (£15.30 Including VAT at 20%) Quantity:

US Navy Carrier Deck Section This pack contains approx 280 x 215mm of deck section with fold down side walls making a neat display base. All the correctly spaced location holes are included for 18 aircraft tie down points and are matched to the cast tie-down points provided in our USN Deck Set (above), which will fit out two of these deck section units. These cast tie down points, when fitted, provide full under-floor support for this base unit throughout its entire area. In addition - slots are provided in the base for the deck edging panels that are provided in our USN Carrier Deck Diorama Set. Price: £14.50 (£17.40 Including VAT at 20%) Quantity:

Air Show Display Set This original set includes some useful items for displaying your aircraft in an air show setting as opposed to an operational base situation. It includes a Travel Pod [items frequently seen on visiting aircraft for carriage of the crew's personal affects], a pair of Display Aircraft Smoke Pods, four Crowd Barrier Units and RBF Tags and Pins for one aircraft - a bargain set! Price: £12.75 (£15.30 Including VAT at 20%) Quantity:

Weapons Detailing Set This generic set is a must for all 1/48nd fast jet modellers who are detailing kit-supplied weapons rather than using our own full replacement weapon sets [You Naughty Boys - tut-tut!!!]. This set in etched nickel silver provides you with a generous selection of mounting lugs, sway braces, and bomb fuse vanes + M-904 fuse details for Mk.82/83/84 USAF/USN bombs (these and the sway braces can be left unpainted for added detail). Price: £5.20 (£6.24 Including VAT at 20%) Quantity:

Russian/ex-Soviet Wheel Chocks This fret contains parts several units of three styles of former-soviet wheel chocks, which are used by Russia, and former Warsaw Pact countries, on both jets and helicopters. Price: £6.00 (£7.20 Including VAT at 20%) Quantity:

USAF/US Navy Weapons Sets

Mk.82/BSU-49 500lb Retarded Bombs Two beautifully detailed units in injection resin and etched nickel silver with full fuse and lanyard detail Price: £5.20 (£6.24 Including VAT at 20%) Quantity:

Tactical Munitions Dispenser [TMD] Cluster Bomb Set Two beautifully detailed SUU-64-65-66 dispensers used for the CBU-87 (SUU-65) Combined Effects Munitions (CEM), CBU-89 (SUU-64) Gator - both used extensively in the Gulf War, and the newer CBU-97 (SUU-66) Sensor-Fused Weapon. Price: £5.20 (£6.24 Including VAT at 20%) Quantity:

GBU-10 2,000lb Laser Guided Bomb Set Two of these large post-Vietnam Gulf-War era weapons in resin and photo-etched brass, with cast seeker heads [makes C/B D/B E/B & F/B versions] Price: £7.60 (£9.12 Including VAT at 20%) Quantity:

GBU-24/B 2,000lb Paveway III Laser-Guided Bombs Two of these large Mk.84-based bombs [used by F.111F, F.15E & F.16], in resin and metal with superbly detailed fin and fin housing details. Price: £7.60 (£9.12 Including VAT at 20%)

GBU-24I 2,000lb Paveway III Laser-Guided Bombs Two of these post-Gulf War BLU-109A/B-based ‘Bunker-Busters’ used by F.111F, F.15E, F.16 - two of these large units in resin and metal with superbly detailed fin and fin housing details. Price: £7.60 (£9.12 Including VAT at 20%) Quantity:

AIM-7F/M Sparrow Missiles Two units in resin, supplied with etched wings, fins and rear cover plates. Price: £5.20 (£6.24 Including VAT at 20%) Quantity:

AIM-9L/M/R/S Post-Vietnam Sidewinder Missile Set Two super-detailed units in metal and photo-etched brass, with launch rails and safety caps. Price: £5.20 (£6.24 Including VAT at 20%) Quantity:

AIM-120 AMRAAM Missile Set Two super detailed units in injection resin and photo-etched brass. Price: £5.20 (£6.24 Including VAT at 20%) Quantity:

ECM Pod Set Super-value set in injection resin and etched brass - includes 2 AN/ALQ-131 Pods - one shallow & one deep dish configuration + one AN/ALQ-101 pod. Price: £8.40 (£10.08 Including VAT at 20%) Quantity:

Online Catalogue | Flightpath | 1/48th Post War USAF/US Navy/Russian