Online Catalogue
 Home Up a Level Terms & Conds Search View Cart Checkout Contact Us 

1/35th Vehicles

Online Catalogue | Firing Line | 1/35th Vehicles

About Firing Line 1/35th Vehicle Kits

These are very different from most other vehicle kits in this scale. The resin parts are supplied 99% ready to use, with no large mould feeds to remove. Smaller fittings and guns are not in resin, which is most unsuitable for such items, but are cast in high-grade metal. Etched detailing is supplied in all the kits but in addition, is also used constructionally in many of the kits.

Ferret Armoured Cars

The Ferret Scout Car served the British Army for well over a generation, in many variants. We produce three of these - all to the same high standard.

These are the cheapest Ferrets on the market - with a hull moulded in injection resin with no large feeds to sand away, high quality castings and the finest of etched detail frets giving such items as, early and late style sand channels, light grilles, makrolon turret shield for Mk.2, wire storage bin, Jerry can holder etc - if you want a top-quality Ferret at low-low price - look no further!


Ferret M.1/2 Light Reconnaissance Vehicle

Price: £32.50 (£39.00 Including VAT at 20%)









Quantity:  


Ferret Mk.2 Scout Car

Price: £32.50 (£39.00 Including VAT at 20%)









Quantity:  


Ferret Mk.2/6
with Vigilant missiles and super-detailed launchers

Special Offer Price


Price: £34.50 (£41.40 Including VAT at 20%)









Quantity:  

Alvis vehicles

This series of Alvis vehicles offer un-rivalled value for money - with main parts in injection resin, and including finely-etched detailing and superb cast fittings. The Saracens include ultra-fine multi-layer etched rear door assemblies - beware of substitutes - these are THE kits for the serious modeller who also wants excellent value-for money!


Saladin Mk.2 Armoured Car
Built by Alvis, these vehicles were used by the British Army from the 1950s, with the production of over 1170 vehicles being completed by 1972. Some were used in the early stages of Desert Storm by the Kuwaiti Armed Forces. This kit now comes with up-graded wheels and many re-tooled parts
Price: £48.50 (£58.20 Including VAT at 20%)









Quantity:  


Saracen Mk.2 Armoured Personnel Carrier
These fascinating vehicles entered service with the British Army in 1950 - their introduction into service being accelerated due to the Malayan Emergency. They were also used in Northern Ireland during the early period of the current troubles. Now with etched hub rings and entirely new etched rear hull plate with super-detailed multi-layer doors which include door stay hooks and new rear steps etc.
Price: £53.50 (£64.20 Including VAT at 20%)









Quantity:  


Stalwart Mk.2 High Mobility Load Carrier
This beautiful kit covers the Mk.2 version of this large amphibious-capable lorry used by the British Army from the 1960s. In the 1970s the army placed less emphasis on the Stalwart's water-borne capability, primarily using it as a high-mobility load carrier, and a large number of these vehicles were based in Germany. This kit features components in resin, cast metal and photo-etched brass, with full suspension, and cab detail being a feature of the model. Later, we will be producing an add-on kit for the crane unit, as carried by the Stalwart.
Price: £74.50 (£89.40 Including VAT at 20%)









Quantity:  


FV.432 Engine Pack
This is a super-detailed model in resin and cast metal of the FV-432 engine, complete with radiator unit and support framework. It makes an ideal accessory for the Accurate Armour models, and is also a good load unit for use in our Stalwart kit
Price: £16.50 (£19.80 Including VAT at 20%)









Quantity:  

Four Super-Detailed Sets to Refine and Convert the Revell/Italeri Series III Land Rover 109 Soft Top Kit

These sets include new wheels, and body and cab fittings. They feature replacement double skin windscreen and upper door etchings, and are supplied with FFR aerial boxes and racking. Finely etched radiator grilles and many other fittings are included. The soft top version includes a roof storage bin and support framework, and the hard top conversion has all the required additional parts. The hard top conversion is also available with all the extra parts to model an HAC 25pdr. field gun tractor, and this set also includes a set of etched parts to detail the Tamiya 25pdr, field gun kit.


Land Rover 109 Soft Top Detail & Fittings Set
Set include new wheels, and body and cab fittings. They feature replacement double skin windscreen and upper door etchings, and are supplied with FFR aerial boxes and racking. Finely etched radiator grilles and many other fittings are included. The soft top version includes a roof storage bin and support framework, and the hard top conversion has all the required additional parts. The hard top conversion is also available with all the extra parts to model an HAC 25pdr. field gun tractor, and this set also includes a set of etched parts to detail the Tamiya 25pdr, field gun kit.
Price: £16.50 (£19.80 Including VAT at 20%)









Quantity:  


Land Rover 109 Hard Top Conversion, Detail & Fittings Set.
Set include new wheels, and body and cab fittings. They feature replacement double skin windscreen and upper door etchings, and are supplied with FFR aerial boxes and racking. Finely etched radiator grilles and many other fittings are included. The soft top version includes a roof storage bin and support framework, and the hard top conversion has all the required additional parts. The hard top conversion is also available with all the extra parts to model an HAC 25pdr. field gun tractor, and this set also includes a set of etched parts to detail the Tamiya 25pdr, field gun kit.









Land Rover 109 Hard Top 25pdr. gun tractor Conversion, Detail & Fittings Set.
Set include new wheels, and body and cab fittings. They feature replacement double skin windscreen and upper door etchings, and are supplied with FFR aerial boxes and racking. Finely etched radiator grilles and many other fittings are included. The soft top version includes a roof storage bin and support framework, and the hard top conversion has all the required additional parts. The hard top conversion is also available with all the extra parts to model an HAC 25pdr. field gun tractor, and this set also includes a set of etched parts to detail the Tamiya 25pdr, field gun kit.









Land Rover 109 Detail and Conversion Set for ‘Wombat’ 120mm Anti-Tank Weapon Vehicle
This set provides a super-detailed Wombat 120mm Anti-Tank Weapon, plus 2 spare round containers & six spare rounds. It includes the mounting ramps for the Wombat and other conversion details, plus new wheels, cab details, fold-down replacement windscreen, new radiator overlays, mirrors etc. All in a bargain set.
Price: £26.00 (£31.20 Including VAT at 20%)









Quantity:  

Complete Landrover Kits


Land Rover Lightweight Soft Top.
This kit is a re-tooled issue of the earlier DMM kit, now with superb multi- layer etched doors and windscreen units, giving double skin glazing effect. The kit is now supplied with 2 lengths of PSP planking for use in modelling a Gulf War vehicle.
Price: £36.50 (£43.80 Including VAT at 20%)









Quantity:  


Land Rover Lightweight Hard Top.
A hard top version of the popular Lightweight kit - this is the version that was used by both the Army and the RAF, and includes an etched roof storage bin, as fitted to vehicles used by some specialist army units.
Price: £36.50 (£43.80 Including VAT at 20%)









Quantity:  


Land Rover Lightweight HAC Gun Tractor.
This new kit covers the interesting open vehicles that were used by the Honourable Artillery Company for towing their 25pdr. field guns on ceremonial occasions. This kit is supplied with an etched detail set for use with the Tamiya 25pdr. Field Gun kit
Price: £28.50 (£34.20 Including VAT at 20%)









Quantity:  


Land Rover 1 Tonne General Service
Considered by many to be the ultimate 4x4, this superb vehicle has now left British Forces service after more than 25 years. The kit features full cab interior detail, and a wealth of other fine fittings in cast metal and photo-etched brass. A fully-detailed lower body/chassis unit is a feature of this kit, which, like the Lightweight, features fully detailed spring/axle assemblies, and a new winch unit.
Price: £48.50 (£58.20 Including VAT at 20%)









Quantity:  


General Service Trailer
An ideal companion to our Land Rover kits. This is a beautifully detailed little model with a one-piece resin trailer and cast fittings, together with a load of Jerry cans, the kit comes with an etched fret, giving a tarpaulin sheet, retaining hooks and Jerry can handles.
Price: £16.95 (£20.34 Including VAT at 20%)









Quantity:  

Other 1/35th Vehicles


Bedford MK 4 Tonne General Service Lorry
The classic Bedford MK has been in widespread use by British forces for over 30 years. Although now largely usurped by the DAF 4 Tonner, it still remains in widespread use, particularly in specialist roles.

This kit is in injection resin, cast metal and etched brass - it includes superb chassis detail, full cab interior detailing, our multi-layer cab window system, finely-etched radiator grille and makers plate detailing, and a multi-layer etched wheel hub assembly, with all the distinctive detail of the real thing. It is hard to imagine many British Army scenes of the last 30 years, where a Bedford MK is not too far away.

Price: £76.50 (£91.80 Including VAT at 20%)









Quantity:  


Bedford MK 4 Tonne General Service Lorry - with CB-300 Series Box Body
This is the version of the MK used by the specialist units such as Signals and Tactical Offices and Command Posts. The Box Body is a fold-up etched assembly, with fine rivet detailing. The Rear Step unit is included, together with many other add-on details
Price: £85.50 (£102.60 Including VAT at 20%)









Quantity:  


Bv-206 All Terrain Vehicle
This large kit features both vehicles’ body and floor units moulded in injection resin, together with a large quantity of finely cast fittings. The fully detailed tracks construct from just eight etched pieces per complete track, to form a flexible but strong wrap around unit. The kit comes with a super-detailed vehicle coupling assembly, a comprehensive set of etched fittings, giving such items as double skin window frames, mud flaps, fine grille-work, a gun mount ring and much more. A highly detailed interior is provided, together with dashboard films. The kit is supplied with colour-coded instructions and photo-references for many of the assembly stages
Price: £82.50 (£99.00 Including VAT at 20%)









Quantity:  


Wombat 120mm Recoilless Anti Tank Weapon
A super detailed kit of the fascinating Wombat in finely cast metal, with etched fittings. It includes full breach and sight detail, with 'open' cast venturi cone that can be fitted in open or closed position. The undercarriage of the weapon is fully detailed as well, and can be assembled in 'stowed' or 'firing' mode.
Price: £14.50 (£17.40 Including VAT at 20%)









Quantity:  


Rapier Field Standard B Anti-Aircraft Missile System
This kit includes missile launcher, Blindfire radar unit, optical trackler, secondary sight, CDU, two generator units and figure - this comprehensive kit builds into an impressive display of the version of Rapier that saw action in both the Falklands and Gulf conflicts. The kit is in injection resin, cast metal and etched brass to bring you one of the most detailed military vehicle kits available. It is ideal for display with our Land Rover 1 Tonne kits in an impressive diorama - these being the main vehicles used to tow the system around. The kit is supplied with colour-coded instructions and photo-references for many of the assembly stages.
Price: £67.50 (£81.00 Including VAT at 20%)









Quantity:  


Rapier Missile Re-Supply Trailer
A superbly detailed kit in resin, cast metal and etched brass, with one-piece body/chassis unit. This model can be used with the One-Tonne Land Rover in any Rapier display. The kit includes a full load of 9 containered Rapier spare rounds - moulded in one block of eight units, with the remaining round as a separate item to assist diorama modellers who wish to portray a missile re-loading sequence.
Price: £22.50 (£27.00 Including VAT at 20%)









Quantity:  

Other Vehicle Accessories


British Army Vehicle Detailing Set
This is an essential set for any serious modeller of 1950s-80s British Army secondary vehicles to have on their work-bench. It contains a host of useful details such as steering wheels, pedals, handbrakes, gear sticks, radio racking, 24V aerial boxes, aerial mounts and bases, Jerry cans and carrying frameworks, tools, fire extinguishers, number plates, windscreen wipers, tilt clips and more. In addition, two super detailed guns are included with their mount assemblies - a Bren gun and a Browning .30" machine gun - a super-detailed cast and etched set with all this at a real bargain price.
Price: £14.50 (£17.40 Including VAT at 20%)









Quantity:  


NATO Load Carrying Pallets (2)

Price: £3.50 (£4.20 Including VAT at 20%)









Quantity:  


Traffic Cones
A set of ten traffic cones used in great profusion in many countries over the past 35-40 years.
Price: £3.50 (£4.20 Including VAT at 20%)









Quantity:  


PSP Planking
This set provides 14 sections of this material, covering a sheet area of 90 x 215mm, and is useful for any number of military vehicle displays. These etched sections interlock as per the real thing, and can be made into half-sections for 'squaring off' areas of a display.
Price: £7.60 (£9.12 Including VAT at 20%)









Quantity:  


Vehicle Camouflage Netting.
Finely etched, with all mock-foliage detail on a relief-etched netting background - this pack provides 215x140mm of this material on fine brass - ideal for covering the tilts of vehicles such as the MK or Land Rover 1 Tonne
Price: £11.20 (£13.44 Including VAT at 20%)









Quantity:  

Online Catalogue | Firing Line | 1/35th Vehicles